Skip to content

Try X-PHY Deepfake Detector Free for 30 Days

MIL-STD-810H Drop Rated

Storage That Survives the Drop

X-PHY ToughX is engineered to absorb impact and keep data intact — whether it's a soldier's body camera hitting concrete or a drone crashing mid-mission. When the device takes the fall, your data doesn't.

1.8m

Drop Resistance

Onto hard surfaces, all orientations

2,000G

Shock Tolerance

Half-sine shock pulse, 0.5ms

0

Data Loss on Impact

Power-loss protection active

Industry Challenges

Why Drops Destroy Standard Storage

Standard storage media was designed for controlled environments. The moment a device hits the floor — on a construction site, in a combat zone, or at a remote field station — the data inside is at serious risk of permanent loss.

Flash Cell Damage from Physical Shock

The NAND flash cells inside standard SSDs and memory cards are physically fragile. A sharp impact — even from waist height — can crack solder joints, dislodge controller chips, and cause immediate or latent data corruption that may not surface until the data is critically needed.

Write-in-Progress Data Loss on Drop

When a device is dropped during an active write operation, sudden power interruption corrupts the data buffer — leaving files incomplete, file systems damaged, and in some cases the entire storage volume unreadable. In the field, there is no recovery window.

Cumulative Shock Degradation

Even drops that don't cause immediate failure create micro-fractures and stress damage inside consumer-grade storage. Over weeks and months of daily drops in the field, this cumulative damage leads to sudden, unpredictable failures — often with no prior warning.

The Solution

X-PHY ToughX: Built to Take the Hit

Military-spec drop resistance, power-loss data protection, and a ruggedised enclosure engineered from the ground up for the realities of field deployment.

Carbon fibre ruggedised enclosure

MIL-STD-810H Ruggedised Enclosure

The ToughX chassis is built to MIL-STD-810H specifications — tested across 26 drop orientations from 1.8 metres onto hard concrete. The internal component assembly is shock-mounted to absorb and distribute impact energy away from the flash cells and controller.

Power-loss protection mid-write

Power-Loss Protection Mid-Write

On-board capacitors provide enough energy to complete any in-progress write operation the moment power is cut by a drop. Every byte in the write buffer is committed to flash before shutdown — so a fall never corrupts your data, even mid-recording.

Industrial conformal coating internal protection

Conformal Coating & Underfill Protection

Every ToughX PCB is coated with industrial-grade conformal coating and critical components are underfilled — locking solder joints and silicon in place against repeated shock loads. This prevents the micro-fracture degradation that silently kills standard storage over time.

Drop Rating

1.8m

MIL-STD-810H Certified

Shock Tolerance

2,000G

Half-Sine 0.5ms Pulse

Data Loss on Drop

Zero

Power-Loss Protected

Technical Superiority

Engineered for the
Realities of the Field

26-Orientation Drop Testing

ToughX is tested across all 26 drop orientations defined by MIL-STD-810H — corners, edges, and flat faces — ensuring complete protection regardless of how the device lands. No orientation is a weak point.

Security Survives the Impact

The AI security engine and AES-256 encryption remain fully active after drop events. Physical shock does not disable, reset, or bypass the hardware security layer — data stays protected even when the device is damaged.

Drop-In Form Factor — No Bulk Added

ToughX delivers military-spec drop resistance in the same microSD, SD, and SSD form factors as standard media. Ruggedisation is built in — not bolted on — so no external cases or carriers are required.

Impact Test: Complete
1.8m Flat Drop Hard concrete · 26 orientations
PASSED
2,000G Shock Pulse Half-sine · 0.5ms duration
PASSED
Mid-Write Drop Active 4K write · power cut
0 DATA LOSS
Security Post-Impact AES-256 + AI engine status
ACTIVE
POWER_LOSS_PROTECT ENGAGED
DATA_INTEGRITY VERIFIED
AES_256_ENGINE ACTIVE
First responder field deployment scenario

Use Case Scenario

First Responder Body Camera — High-Impact Urban Deployment

A tactical unit officer is recording an active operation. The body camera takes a hard impact against a wall during entry — the device cuts out momentarily. With ToughX inside, every frame recorded before the drop is intact, the write buffer was flushed in milliseconds, and when power returns, recording resumes with no data lost and security fully active.

1.8m drop onto concrete — zero data loss, zero file system corruption
Write buffer flushed to flash before power loss — footage complete and admissible
AES-256 encryption stays active post-impact — data unreadable if camera is seized
Same microSD form factor — no hardware change to existing body camera fleet